- Inverters
- >
- KBP-200D Auto Sensing 11-18 VDC and 24-32 VDC Inverter
KBP-200D Auto Sensing 11-18 VDC and 24-32 VDC Inverter
The KBP-200D is a quick start - smart auto sensing inverter that senses the input voltage. No worrying about what voltage will be available in the aircraft, vehicle or boat during your shoot.
Input voltage ranges of 11-18 VDC and 24-32 VDC.
Made from extruded aluminum, the inverter weighs 3.2 lbs and the outer dimensions are 9.5" x 4.75" x 3.125" making it larger and a little heavier than our standard single voltage inverters. Price........$700
The inverter is capable of running:
Two 2 axis gyros such as two KS-6 or KS-8 gyros or two KS-4x4 gyros
OR: One KS-6x6 or one KS-8x8 gyro
The inverter is also meant to be a quick start inverter, which also means it will draw a lot of power for the first 8 minutes, getting the gyro up to full running speed as fast as possible. Once 8 minutes have passed, the inverter will "downshift" into "cruising" mode.
For example: a KS-6x6 or KS-8x8 will draw about 8.5 amps (@ 14 volts) at start up, dropping to about 2.6 amps after 8 minutes. If using a 24-32 volt power input, the amp draw will be about half of what 14 volts draw.
IMPORTANT: We will supply a DC cable with a 3 pin female XLR connector on one end and the other end will have bare wire so you can adapt it to your power source. We do not provide the power source and our standard batteries cannot be used. Standard length is 4 feet, but if you prefer it longer, please let us know.